The car paint protection film is the process of protection of cars in which the whole car’s material is covered with a thin transparent material made up of thermoplastic urethane on used or un-used cars. These protection material are applied on outside the original paint of car. These things protect the car from stone chips, bugs splatter, and minor abrasions.
The process of car paint protection film in sydney take multiple steps which we see in the step vise section which are given below:
- Client Consultation: In this step the owner of the car or car maker see that if there is a high need tocover the car with film then they go to the film shop where they consult that which part of car is more damaged and which part is in some better condition. Then the client make an agreement with the company’s manager to get his car in very protective form.
- Vehicle preparation: In this step the vehicle is prepared for the process of car paint protection film.Here the damaged paint is removed and make that surface smooth to apply liquid. In new cars the quality of paint is determined because on some paints the urethane is not apply able. After this the car is ready to apply urethane and some others material things which can also be used for the same purpose like tough, clear, flexible, acrylic polyurethane film.
- Paint correction: In this step the already applied paint is make clearer for the material. Paint changing can also be done in this process. If one paint is tougher and not preferable for the film then this paint is changed from that paint which is familiar with the film. By doing so the layer of film becomes more protective.
- Vehicle re-wash:In this step the car is again washed to make it clean from the outside dirt and germs particles.This step is very important because if the film is applied without washing the car then it will not work for longer period of time. It will damage the film in only half duration of its life.
- Paint protection film:In this step the ceramic paint protection is also applied or simply the urethane coating is applied on the outside of the car body. The simple urethane film is applied by using a simple film gun. First the film is filled in the gun and then sprayed on the car. The small particles then stuck with the car’s paint and give a shiny outcome. But unlike this the ceramic paint protection is applied directly on the car body without using a spraying gun. This process is considered as more convenient because there leaves no empty spaces.
- Finishing touches: This step Include the overseeing of car after drying the film. Here the car painter make sure that every piece of material is completely coated with film. If there is some place which is left from film is covered then.
Final inspection: This is the final step of car paint protection film where the ceramic paint protection in sydney or simple film protection is oversee by the car painter.